T RAIL 110 SPLICE

What It Is

The PV‑ezRack Splice for T‑Rail 110 (Part No. ER‑SP‑T110) is a rail splice/joiner plate designed specifically to join two sections of T‑Rail 110 so you can extend rail lengths continuously without cutting rails on site. It’s used in SolarRack, SolarRoof and ground‑mount systems like SolarTerrace. Clenergy+1

🔩 Key Features

• Part Number: ER‑SP‑T110 — Splice for T‑Rail 110. idealelectrical.com

• Purpose: Connects two T‑Rail 110mm rail sections for longer continuous runs. Clenergy

• Compatible With: T‑Rail 110 (65 × 110 mm) profile rails found in PV‑ezRack / SolarTerrace systems. clenergy.com.au

• Material: Typically aluminium splice plate with corrosion‑resistant finish. ebranch.online

• Hardware: Includes self‑tapping screws (e.g., flange face and M6.3 × 22mm) for securing the splice to the rail ends. clenergy.co.jp

• Size: Approx. 45.7 mm × 105.6 mm splice plate body — fits the T‑Rail profile. mm.mmem.com.au

• Application: For solar panel mounting structures where rails exceed standard lengths and must be joined (e.g., rooftop or ground mount). clenergy.com.au

🛠 Typical Installation

1. Slide one half of the splice plate into the channel at the end of the first T‑Rail 110 section.

2. Fasten screws to securely lock it in place.

3. Slide the second rail over the remaining portion of the splice plate.

4. Tighten the remaining screws so both rails are securely joined.

5. The splice helps maintain structural continuity and alignment across the rail join. Manuals+