ez PV-GROUNDING LUG

📦 What It Is

Clenergy PV‑ezRack Grounding Lug (with Clenergy Logo)
Part No: EZ‑GL‑ST (standard)
A grounding lug designed to be fixed into the rail channel of Clenergy racking systems to connect the rack to a grounding conductor (earth wire) — ensuring electrical safety and compliance. It’s part of the PV‑ezRack grounding system along with grounding clips and suitable for ECO, T50, T110 and similar rails when used with a Z‑module. Clenergy

🧰 Key Features

🔌 Grounding & Safety

• Provides a secure earth connection point for PV racking – essential to safely dissipate fault currents and meet electrical codes.

• Often used one grounding lug per rail row to ensure continuity of the grounding path. Clenergy

🧲 Materials & Build

• Lug body & pipe: HPb59‑1 brass alloy – strong and conductive.

• Bolt/washer: SUS304 stainless steel – corrosion‑resistant.

• Z‑module: AL6005‑T5 aluminium – lightweight & structural. Clenergy

📊 Specs (Typical)

• Max Cable Size: 10 mm² (standard PV grounding conductor) Clenergy

• Dimensions: ~23 mm × 45 mm Clenergy

• Weight: ~0.087 kg Clenergy

• Certifications: ETL‑listed to UL467‑2013 and compliant to multiple building & grounding standards. Clenergy

🛠 Installation

1. Position the grounding lug in the top or side channel of the rail (ECO/T50/T110 etc.) using a Z‑module.

2. Tighten the bolt so the lug makes good contact with the rail extrusion (this bonds the rail electrically).

3. Insert and tighten the ground cable into the lug (bare conductor or stripped section).

4. Ensure a continuous grounding path back to your earth electrode or grounding conductor. Clenergy

Clenergy’s installation guide recommends at least one grounding lug per rail row to meet electrical resistance requirements.